OT FIT 1000/220...400/1A6 D NFC HC 2CH B L
A termék előnyei
- Very high efficiency (up to 97%)
- Protection against 4 kV burst and 2 kV surge voltage (L-N and L-N/PE)
Alkalmazási területek
- Horticulture lighting
- Industry lighting
- Suitable for luminaires of protection class I
Műszaki adatok
Elektromos adatok
Névleges bemeneti feszültség
220 400 V
Hálózati frekvencia [calc.]
50 60 Hz
Bemeneti feszültség, AC
198 440 V
Current set
NFC
Teljesítménytényező, λ
> 098
Efficiency in full-load
97 %
Készülék vesztesége
50 / 30 W
Bemelegedési áram
9.6 / 15.9 A
Megszakítón megengedett előtét db 10 A (B)
-
Megszakítón megengedett előtét db 10 A (B)
-
Megszakítón megengedett előtét db 16 A (B)
3 / 8
Megszakítón megengedett előtét db 16 A (B)
3 / 8
Előtétek legnagyobb db-száma/megszakító
5 / 12
Lökőfeszültség-állóság, (L/N-föld)
2 kV
Lökőfeszültség-állóság, (L-N)
2 kV
Névleges kimeneti feszültség
150 550 V
Névleges kimeneti áram
400 1600 mA
Output PSTLM
≤1
Output SVM
≤0.4
Névleges kimeneti teljesítmény
400 1050 W
Legnagyobb kimenő teljesítmény
1050 W
Default output current
400 mA
Galvanikus elválasztás
Non isolated
Kimeneti ripple áram (100 Hz)
< 1 %
Méretek és súly
Szerelési furattávolság, hosszúság
258.0 mm
Termék súlya
140000 g
Magasság
430 mm
Szélesség
1360 mm
Hosszúság
3120 mm
Hőmérséklet és működési feltételek
Környezeti hőmerséklet tartomány
-25 +50 °C
Max. hőmérséklet a tc mérőponton
65 °C
Max. házhőmérséklet hibaállapotban
110 °C
Hőmérséklet-tartomány tároláskor
-40 +85 °C
Megengedett légnedvesség üzem közben
5 85 %
Élettartam
Elektronikus előtét élettartam
100000 / 50000 h
További termékadatok
Tokozott
Nem
Képességek
Dimmelhető
No
Túlmelegedés védelem
Yes
Túlterhelés védelem
Yes
Zárlatvédett
Yes
Nem terhelés-védett
Yes
Intended for no-load operation
Nem
Max. vezetékhossz lámpa/LED modul
2.5 m
Alkalmasság érintésvédelmi osztályhoz
I
Control interface
NFC
Number of channels
2
Programming
Tuner4TRONIC
Igen
Programming device
DALI magic / FEIG
Tuner4TRONIC Field App
Igen
Tanúsítványok és szabványok
Jóváhagyási jelek
CE
Szabványok
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547
Védettség típusa
IP20
Logisztikai adatok
Commodity code
85044083900
Környezetvédelmi információk
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
28-04-2023
Primary Article Identifier
4052899624429
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
07d89647-7455-414d-8bb4-4a707ac622e7
Csomagolási információk
EAN |
Egységár |
Egységár |
Méretek |
Súly |
Térfogat |
---|---|---|---|---|---|
4052899624429 |
UNV
| 1 | 312mm x 136mm x 43mm | 1400.00g | 1.82dm³ |
4052899624443 |
VS
| 5 | 345mm x 265mm x 165mm | 7468.00g | 15.09dm³ |
Letöltések
Bővebben a termékcsaládról
A termék jellemzői
- 1- and 2-channels drivers
- Line frequency: 47.5 60 Hz
- Versatile scope of application due to output power range of up to 1050 W
- Supply voltage: 220 240 V / 400 V
- Available with output current range: up to 1,600 mA
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Termékek
Termék neve |
|
|
|
|
|
Termék adatlap | ||
---|---|---|---|---|---|---|---|---|
OT FIT 500/220...400/1A6 D NFC HC B L
|
150 550 V | 400 1600 mA | 3120 mm | 1360 mm | 430 mm | |||
OT FIT 1000/220...400/1A6 D NFC HC 2CH B L
|
150 550 V | 400 1600 mA | 3120 mm | 1360 mm | 430 mm |