OT FIT 75/220-240/350 D CS L
A termék előnyei
- Safety requirement due to overload, overtemperature, short-circuit protection
Alkalmazási területek
- Suitable for luminaires of protection class I
Műszaki adatok
Elektromos adatok
Névleges bemeneti feszültség
220 240 V
Hálózati frekvencia [calc.]
50 Hz/60 Hz
Bemeneti feszültség, AC
198 264 V
Current set
DipSwitch
Teljesítménytényező, λ
0.98
Efficiency in full-load
93 %
Készülék vesztesége
6,0 W
Bemelegedési áram
< 40 A
Megszakítón megengedett előtét db 10 A (B)
8
Megszakítón megengedett előtét db 10 A (B)
13
Megszakítón megengedett előtét db 16 A (B)
13
Megszakítón megengedett előtét db 16 A (B)
22
Lökőfeszültség-állóság, (L/N-föld)
2 kV
Lökőfeszültség-állóság, (L-N)
1 kV
Névleges kimeneti feszültség
70 220 V
Névleges kimeneti áram
200 / 250 / 300 / 350 mA
Kimeneti ripple áram (100 Hz)
< 4 %
Output PSTLM
≤1
Output SVM
≤0.4
Névleges kimeneti teljesítmény
16 77 W
Legnagyobb kimenő teljesítmény
77 W
U-OUT (üzemi feszültség)
< 250 V
Teljes harmonikus torzítás
< 10 %
Default output current
350 mA
Méretek és súly
Szerelési furattávolság, hosszúság
200,0 mm
Termék súlya
140.00 g
Vezeték keresztmetszet, bemeneti oldal
0,5 1,5 / 0,75 1,5 mm²
Vezeték keresztmetszet, kimeneti oldal
0,5 1,5 / 0,75 1,5 mm²
Vezeték-előkészítési hossz, bemenet
8,0 9,0 mm
Magasság
21.0 mm
Szélesség
30.0 mm
Hosszúság
210.0 mm
Vezeték-előkészítési hossz, kimenet
8,0 9,0 mm
Szín és anyag
Ház anyaga
Metal
Hőmérséklet és működési feltételek
Környezeti hőmerséklet tartomány
-25 +50 °C
Max. hőmérséklet a tc mérőponton
75 °C
Max. házhőmérséklet hibaállapotban
110 °C
Hőmérséklet-tartomány tároláskor
-25 80 °C
Megengedett légnedvesség üzem közben
5 85 %
Élettartam
Elektronikus előtét élettartam
50000 / 100000 h
Képességek
Dimmelhető
No
Túlmelegedés védelem
Automatic reversible
Túlterhelés védelem
Automatic reversible
Zárlatvédett
Automatic reversible
Nem terhelés-védett
Yes
Intended for no-load operation
Nem
Max. vezetékhossz lámpa/LED modul
2,0 m
Alkalmasság érintésvédelmi osztályhoz
I
Number of channels
1
Programming
Programming device
DIPswitch
Tanúsítványok és szabványok
Jóváhagyási jelek
CE / ENEC 05 / EAC / CCC / BIS / RCM
Szabványok
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Védettség típusa
IP20
Logisztikai adatok
Commodity code
85044083900
Környezetvédelmi információk
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-07-2023
Primary Article Identifier
4062172006323
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
267d6688-fe0a-4b08-92aa-47525fd35f99
Csomagolási információk
EAN |
Egységár |
Egységár |
Méretek |
Súly |
Térfogat |
---|---|---|---|---|---|
4062172006323 |
UNV
| 1 | 210mm x 30mm x 21mm | 140.00g | 0.13dm³ |
4062172006330 |
VS
| 20 | 234mm x 161mm x 101mm | 2965.00g | 3.81dm³ |
Letöltések
Adatlapok
Bővebben a termékcsaládról
A termék jellemzői
- Supply voltage: 220 240 V
- Line frequency: 50 Hz | 60 Hz
- Line voltage: 198 264 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Termékek
Termék neve |
|
|
|
|
|
Termék adatlap | ||
---|---|---|---|---|---|---|---|---|
![]() |
OT FIT 35/220...240/350 D CS L
|
40 160 / 40 115 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
![]() |
OT FIT 65/220-240/350 D CS L
|
70 220 / 70 190 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
![]() |
OT FIT 75/220-240/350 D CS L
|
70 220 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm |