OT FIT 60/220 240/350 D CS L
A termék előnyei
- Flexible current setting (DIPswitch 6 currents)
- Higher quality of light thanks to low output ripple current
- User flexibility with six different output currents from one driver
- Safety requirement due to overload, overtemperature, short-circuit protection
- Long reliable life at maximum permitted temperatures
- Enable slim fixture design with flat 21 mm height metal housing
Alkalmazási területek
- Suitable for luminaires of protection class I
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for installation in emergency lighting systems according to EN 60598-2-22
Műszaki adatok
Elektromos adatok
Névleges bemeneti feszültség
220 240 V
Hálózati frekvencia [calc.]
0/50/60 Hz
Bemeneti feszültség, AC
198 264 V
Current set
DipSwitch
Teljesítménytényező, λ
0.80C 0.95
Efficiency in full-load
92 %
Készülék vesztesége
5.33 W
Bemelegedési áram
24.5 A
Megszakítón megengedett előtét db 10 A (B)
13
Megszakítón megengedett előtét db 16 A (B)
21
Lökőfeszültség-állóság, (L/N-föld)
2 kV
Lökőfeszültség-állóság, (L-N)
1 kV
Névleges kimeneti feszültség
90 175 V
Névleges kimeneti áram
100 / 150 / 200 / 250 / 300 / 350 mA
Output PSTLM
≤1
Output SVM
≤0.4
Névleges kimeneti teljesítmény
18 61.2 W
Legnagyobb kimenő teljesítmény
61.2 W
Kimeneti ripple áram (100 Hz)
< 3 %
Méretek és súly
Szerelési furattávolság, hosszúság
200,0 mm
Termék súlya
154.00 g
Vezeték keresztmetszet, bemeneti oldal
0,5 1,5 mm²
Vezeték-előkészítési hossz, bemenet
8,0 9,0 mm
Magasság
21.0 mm
Hosszúság
210.0 mm
Szélesség
30.0 mm
Hőmérséklet és működési feltételek
Környezeti hőmerséklet tartomány
-25 +50 °C
Max. hőmérséklet a tc mérőponton
75 °C
Max. házhőmérséklet hibaállapotban
110 °C
Hőmérséklet-tartomány tároláskor
-25 85 °C
Megengedett légnedvesség üzem közben
5 85 %
Élettartam
Elektronikus előtét élettartam
50000 / 100000 h
Képességek
Dimmelhető
No
Túlmelegedés védelem
Automatic reversible
Túlterhelés védelem
Automatic reversible
Zárlatvédett
Automatic reversible
Nem terhelés-védett
Yes
Intended for no-load operation
Nem
Max. vezetékhossz lámpa/LED modul
2,0 m
Alkalmasság érintésvédelmi osztályhoz
I
Number of channels
1
Programming
Programming device
DIPswitch
Tanúsítványok és szabványok
Jóváhagyási jelek
CE / ENEC / CCC / RCM / UKCA / BIS / EAC
Szabványok
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547/Acc. to EN 55015
Védettség típusa
IP20
Logisztikai adatok
Commodity code
85044083900
Környezetvédelmi információk
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
16-08-2023
Primary Article Identifier
4062172285292
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
9ac7e73c-b894-4f66-8671-302077d42e5e
Csomagolási információk
EAN |
Egységár |
Egységár |
Méretek |
Súly |
Térfogat |
---|---|---|---|---|---|
4062172285292 |
UNV
| 1 | 210mm x 30mm x 21mm | 154.00g | 0.13dm³ |
4062172285308 |
VS
| 20 | 237mm x 162mm x 130mm | 3389.00g | 4.99dm³ |
Letöltések
Bővebben a termékcsaládról
A termék jellemzői
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Supply voltage: 220 240 V
- Line voltage: 198 264 V
- Wide output current range
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Termékek
Termék neve |
|
|
|
|
|
Termék adatlap | ||
---|---|---|---|---|---|---|---|---|
OT FIT 18/220
240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | |||
OT FIT 40/220
240/350 D CS L
|
40 120 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | |||
OT FIT 60/220
240/350 D CS L
|
90 175 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | |||
OT FIT 75/220...240/550 D CS L
|
90 216 / 90 188 / 90 167 / 90 150 / 90 136 V | 300 / 350 / 400 / 450 / 500 / 550 mA | 210.0 mm | 30.0 mm | 21.0 mm |