LF-4PIN Protect - Installation Kit
A termék előnyei
- Simple installation, no tools or soldering required (CONNECTsystem)
- Reduced installation time (CONNECTsystem)
- Can be connected to the front of the module or at division points (CONNECTsystem)
- Low profile (CONNECTsystem)
Műszaki adatok
Méretek és súly
Hosszúság
30.0 mm
Termék súlya
20.00 g
Szélesség
19.8 mm
Vezeték keresztmetszet, bemeneti oldal
1,4 mm²
Magasság
13.4 mm
További termékadatok
Utód EAN
4062172016490
Utód EAN
4008321977076
Logisztikai adatok
Commodity code
854442909000
Környezetvédelmi információk
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
30-08-2022
Primary Article Identifier
4008321977076 | 4062172016490
Declaration No. in SCIP database
In work
Csomagolási információk
EAN |
Egységár |
Egységár |
Méretek |
Súly |
Térfogat |
---|---|---|---|---|---|
4062172016490 |
BT
| 1 | 600mm x 150mm x 0mm | 66.00g | 0.01dm³ |
4062172016506 |
VS
| 10 | 570mm x 150mm x 340mm | 1097.00g | 29.07dm³ |
Letöltések
Bővebben a termékcsaládról
A termék jellemzői
- Quick and easy installation
- Compatible with TEC Flex
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Termékek
Termék neve | Termék adatlap | ||
---|---|---|---|
LF-CLIP-FIXTURE PROTECT
|
|||
LF-4CONN Protect
|
|||
LF-ENDCAP Protect
|
|||
LF-4PIN Protect - Installation Kit
|