POWERTRONIC OUTDOOR PTo
A termék jellemzői
- 3DIM functionality (StepDIM/AstroDIM/DALI)
- Energy Efficiency Index EEI: A2
- Lightning protection: up to 10 kV
- Supply voltage: 220…240 V
- Line frequency: 50…60 Hz
- Line harmonics according to EN 61000-3-2
- Immunity according to EN 61547
- RI suppression: to EN 55015
- Safety: to EN 61347-2-12
- Luminous flux factor 1 compared with CCG operation
- Not suitable for DC operation
A termék előnyei
- Energy savings up to 30 % (compared to CCG operation) thanks to 3DIM (except PTo 35)
- High surge protection: up to 3 kV (L-N) / 4 kV (L/N-PE)
- Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
- Excellent thermal behavior for very high limit temperatures tc and ta
Termékek
| Termék neve |
|
|
|
|
|
Termék adatlap | ||
|---|---|---|---|---|---|---|---|---|
|
PTo 50/220…240 3DIM
|
48.0 mm | 220…240 V | 133.0 mm | 50 W | 4,5 kVp | ||
|
PTo 100/220…240 3DIM
|
42.5 mm | 220…240 V | 158.0 mm | 97 W | 4,5 kVp | ||
|
|
PTo 150/220…240 3DIM
|
42.5 mm | 220…240 V | 158.0 mm | 147 W | 4,5 kVp |
Bővebben a termékcsaládról
Alkalmazási területek
- Suitable for luminaires of protection classes I and II
- Suitable for outdoor applications in luminaires with IP > 54
Biztonsági tanács
Ballast losses and lamp heat radiation can lead to heat accumulation in a completely closed case. Therefore it is necessary to ensure that the temperature at the measuring point t of the ECG does not exceed the maximum value.
Attention!
For safety reasons disconnect the device before replacing the lamp!
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.