OPTOTRONIC Intelligent DALI NFC I (sq)
Termékek
Termék neve |
|
|
|
|
|
Termék adatlap | ||
---|---|---|---|---|---|---|---|---|
OTi DALI 25/220...240/700 NFC I
|
15 54 V | 180 700 mA | 171.0 mm | 83.0 mm | 32.0 mm | |||
OTi DALI 35/220...240/1A0 NFC I
|
15 54 V | 350 1050 mA | 171.0 mm | 83.0 mm | 32.0 mm | |||
OTi DALI 60/220...240/1A4 NFC I
|
15 54 V | 600 1400 mA | 171.0 mm | 83.0 mm | 32.0 mm |
Bővebben a termékcsaládról
Alkalmazási területek
- Suitable for use in luminaires with flexible current setting
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for indoor SELV installations
- Suitable for luminaires of protection classes I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.