OPTOTRONIC - 2DIM IP64
A termék jellemzői
- Input voltage: 120…277 V
- Flexible current setting with one additional wire (LEDset2)
- AstroDIM for autonomous dimming with five independent levels (astro mode)
- Isolated 0…10 V interface for unidirectional telemanagement systems
- Overtemperature protection with external NTC or LEDset2 interface
A termék előnyei
- 2DIM functionality in one device (AstroDIM, 0…10 V)
- High surge protection: up to 6 kV (in protection class I or II)
- Fast programming without mains voltage
- Great flexibility due to wide operating temperature range of -40…55 °C
- Protection through double isolation between mains input and LED output
Equipment / Accessories
- OT Programmer hardware for configuration of 2DIM ECGs necessary
- Programmable via Tuner4TRONIC software
Termékek
| Termék neve |
|
|
|
|
Termék adatlap | ||
|---|---|---|---|---|---|---|---|
|
|
OT 50/120…277/800 2DIMLT2 P
|
350…800 mA | 1680 mm | 500 mm | 300 mm | ||
|
OT 50/120…277/1A2 2DIMLT2 P
|
600…1250 mA | 168.0 mm | 50.0 mm | 30.0 mm | ||
|
OT 100/120…277/800 2DIMLT2 P
|
350…800 mA | 1680 mm | 680 mm | 380 mm | ||
|
OT 110/120…277/1A4 2DIMLT2 P
|
600…1400 mA | 1680 mm | 680 mm | 380 mm |
Bővebben a termékcsaládról
Alkalmazási területek
- Street and urban lighting
- Industry
- Suitable for luminaires of protection classes I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.