LFD400MS-G1-BL-06
A termék előnyei
- Reliable connection over long periods of time: IP67 connector with built-in protection against liquids penetrating through the wires into the LED strip
Alkalmazási területek
- Signage and illuminated advertising
Műszaki adatok
Elektromos adatok
Névleges teljesítmény / m
12,0 W
Fotometriai adatok
Névleges domináns hullámhossz
457 467 nm
Fényáram / m
55 lm
Fényáram
330 lm
Méretek és súly
Magasság
141 mm
Termék súlya
104000 g
Hosszúság
6000 mm
Szélesség
100 mm
További termékadatok
Product remark
Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information (see www.osram.com/led-systems)./All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values
Logisztikai adatok
Commodity code
940542319000
Környezetvédelmi információk
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
12-08-2022
Primary Article Identifier
4052899953659
Declaration No. in SCIP database
In work
Csomagolási információk
EAN |
Egységár |
Egységár |
Méretek |
Súly |
Térfogat |
---|---|---|---|---|---|
4052899953659 |
FS
| 1 | 506mm x 502mm x 37mm | 2148.00g | 9.40dm³ |
4052899954847 |
VS
| 6 | 519mm x 246mm x 525mm | 13358.00g | 67.03dm³ |
Letöltések
Bővebben a termékcsaládról
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Termékek
Termék neve |
|
|
Termék adatlap | ||
---|---|---|---|---|---|
LFD400MS-G1-BL-06
|
12-08-2022 | 4052899953659 |