ICUTRONIC DALI CS
A termék jellemzői
- Supply voltage: 220…240 V
- Line voltage: 198…264 V
- Line frequency: 0 Hz | 50 Hz | 60 Hz
A termék előnyei
- Safety ensured by OSRAM (SELV)
- DALI-2 certified
- Touch DIM application: easy to control via pushbutton or sensor
- Easy to use in corridors and restrooms because of three-level Corridor function
- Higher quality of light thanks to low output ripple current
- Housing from 80% recycled plastic
Termékek
| Termék neve |
|
|
|
|
|
Termék adatlap | ||
|---|---|---|---|---|---|---|---|---|
|
|
IT DALI 12/220…240/300 CS
|
9…42 V | 90 / 100 / 120 / 150 / 180 / 200 / 250 / 300 mA | 130.0 mm | 30.0 mm | 22.2 mm | ||
|
IT DALI 30/220…240/700 CS
|
15…42 V | 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA | 97.0 mm | 43.0 mm | 29.5 mm | ||
|
IT DALI 42/220…240/1A0 CS
|
15…42 V | 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA | 97.0 mm | 43.0 mm | 29.5 mm |
Bővebben a termékcsaládról
Alkalmazási területek
- Offices
- Shops
- Panels, spotlight, downlight, and other indoor LED luminaires
- Suitable for indoor SELV equivalent installations
- Suitable for luminaires of protection classes I and II
- Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.